milanbranch.com
  • Home
  • Trackplan
  • RMC Arduino Lighting
  • Home
  • Trackplan
  • RMC Arduino Lighting

Laser Testing

8/7/2022

0 Comments

 
Picture
Picture
I did some tests this evening with my new xTool D1 10W laser. I used a 9mm thick piece of Midwest Product’s Craft Ply. I ran two tests – a cut power test and an engraving power test. Shown above is the engraving test with different power percentages across the top with the speed down the side. As you can see, the laser cut the material very efficiently. The hole in the lower right was three passes at the 100/15 setting. It cut through the 9mm like butter. Crazy!

I think I’m going to like modeling with this machine. :)


0 Comments

Your comment will be posted after it is approved.


Leave a Reply.

    Author

    This blog chronicles my modeling adventures building the Milan Branch of the Iowa Interstate Railroad. I will also be posting about other modeling ideas and concepts that interest me, so feel free to comment. Thanks for visiting. Scott

    For direct contact you
    ​can reach me at:  info@designgrid.com

Site powered by Weebly. Managed by pair Domains